FIRE PROTECTION SOLUTIONS 2017-04-25T03:22:50+00:00

FIRE PROTECTION SOLUTIONS


Firetrace Systems provide Cost-Effective, Stand-Alone, Automatic Fire Suppression Systems for your Critical Equipment, Electrical/Technical Systems and various types of enclosures. The effectiveness of a genuine Firetrace System, happens by utilizing the proprietary Firetrace Detection Tubing (a Linear Pneumatic Heat Sensor), which detects a fire due to precise temperature sensitivity, allowing our systems to react quickly and effectively. This unique detection can be run through the smallest or most complex enclosures to ensure detection is always close at hand. Because Firetrace takes the fire detection and suppression inside of the hazard, a growing fire can be caught quickly, preventing the spread of fire to other parts of the building that would require firefighters or water sprinklers to extinguish. By containing the fire to the individual enclosure, damage is limited to that enclosure and the collateral damage often caused by traditional fire suppression is avoided.

GET IN TOUCH

THE PROBLEM

Electrical enclosures can be found in virtually any industrial or commercial space. In some cases the enclosure might be a single small panel while in others it may involve a large room filled with electrical boxes. Should a fire occur in one of these cabinets, it would typically destroy the contents, but unchecked the fire could take the room or even the building, costing money and downtime. Regardless of the number of enclosures, Firetrace® offers a reliable, cost-effective method to increase the fire protection of these areas by detecting and suppressing the fire in the cabinet Typical enclosures include:

Below are the most common sources of fire in electrical enclosures:

THE FIRETRACE SOLUTION-ELECTRICAL

Because Firetrace takes the fire detection and suppression inside of the hazard, a growing fire can be caught quickly, preventing the spread of fire to other parts of the building that would require firefighters or water sprinklers to extinguish.

The most common sources of fire in electrical enclosures:

  • Wire fatigue

  • Improper installation

  • Overloaded circuits

  • Equipment failures

By containing the fire to the individual enclosure damage is limited to that enclosure and the collateral damage often caused by traditional fire suppression is avoided.

  • Motor control centers

  • Electrical panels

  • Control closets

  • Wiring harnesses

  • Cable trays

  • Power vault

  • UPS

  • Transformer

THE FIRETRACE SOLUTION

  • Targeted suppression that attacks the fire where it starts
  • Detecting the fire at its source interrupts the fire at its earliest stages, usually well before other systems can react
  • Lower cost and more environmentally friendly due to its ability to use smaller equipment and less total extinguishant
  • Enhanced people safety by operating inside the hazard space, not where people are present
  • Does not require electrical sources, battery backups or control panels
  • Better suppression capability since systems operate outside people-occupied spaces
  • Much higher system reliability due to fewer components, lack of wiring and power sources and simple operating principles
  • Simple to maintain with minimal training
  • Quickly detect and suppress fire directly at the source, efficiently and automatically.

Download Information

Acrobat Reader is required to read PDF files


 Click the red icon to get Free Adobe Acrobat Reader.

Think          Global

Global                    Solutions